3phase sanitary stainless steel CIP self priming centrifugal pump
for milk/water manufacturer Tankmanufacturer
Soluction for highe efficiency , low noise, large suction, simple
maintenance, high purity
Technical specifications
Max flow : 30m³/h/132GPM
Max head : 30 H(M)
Max pressure : 3bar/43 PSI
Max operating temperature : 120°C/248°F
Max rev : 1750 min
Max suction height : 8M /22ft
Specifications
Product Name: | CIP Pump /Return pump |
Body Material: | SS304 / SS316L / 1.4301 / 1.4404 |
Seal Material: | EPDM (Standard, FDA approval) FPM(Viton) and NBR |
Max. Flow: | 35 m3/h |
Max. Speed: | 3600 min-1 |
| Max. rev: | 1750Min - 1 |
| Max. suction height | 8m / 22 ft |
Max. Head: | 42H(m) |
Max. Working Pressure: | 4.2Bar |
Max. Working
Temperature: | 120 °C |
Mechanical seal: | C /SIC /EPDM |
Motor: | ABB / domestic |
Motor Frequency: | 50HZ, 60HZ |
Availably connection: | Tri-Clamp, Thread, Flange |
Availably standard: | DIN, SMS, 3A, RJT, ISO/IDF |
Operated: | Electic |
Low discharge option : | Low discharge / diaphragm valve / ball valve / butterfly valve |
Application scope: | Dairy,food, beverage, pharmacy, cosmetic etc |
Applications
1. This pump is a sanitary lateral design self priming pump,it's
suitable for food processing, phamacy and chemical industry.
2. It is specially designed for pumping mterials containing air or
gas, and it can also be used for negative sution with prior priming
as well as with filtration equipments
3. It can be sued for wine, oil,syrups, volatile products such as
alcohol, and other solvents or with products at temperatures close
to boiling point.However, the main use of this pump is for cip
recover.
Operation Principles
1. The impeller is housed beteween the inlet body and the
venturicasing and it rotates in connjunction with the pup shaft
2. The rotation of the impeller and arrangement of the side
channel,creates a negative pressure inside the inlet body
3. Which generates the suction force of the pump. At the same time,
the fluid recives energy in the form of kinetic energy and pressure
eneygy, and this impels it through the impeller casing.
Design and features
1. Motor cover manufactured with Cold-formed plate
2. stainless steel investment casting inlet body and impeller
3. Mechanical seal prevents contacting between the spring and the
pumped fluid.
4. Stainless steel support
5. Surface finished: Sandblast
6. Connection: Threaded/ Clamp / Nut /, DIN11864 Aseptic, KF
7. Standard : DIN, SMS, ISO, IDF, RJT, ASME BPE, 3A, I-LINE
Mechanical Seal System:
Donjoy DJ-CIP Series Sefl-priming pump mechanical seal is
researched and developed together with European swedish famous
company. The mechanical seal is designed with pressure balance and
super long working life,Can be disassembled and maintained easily
without special tollds. Then sanitary purity is according to EU
EHEDG, USA 3-A-02-11, FDA1772600 and so on. And has lots of
configuration
Mechanical seal (standard) :C/SiC/EPDM, sic/c/FKM,
SIC/SIC/EPDM,TC/TC/EPDM, TC/TC/FKM.
- CIP U Series self priming pump Selection Table
CIP U Series self priming pump data sheet
Competitive Advantage
“DONJOY is the only company that pass nine series of products by
American 3A certification organization in Asian sanitary pumps and
valves field.”
Tags : Donjoy pump, Sanitary pump , CIP Pump, Self -priming pump,
Food pump
